Hi guys
We're facing an issue when mapping new LUNs to Solaris 11: new LUNs of 300GB differ in sectors at Solaris level compared to old 300GB LUNs
root@srvsparcmml1:~# prtvtoc /dev/rdsk/c0t60A9800038303952543F48637A494649d0s2
* /dev/rdsk/c0t60A9800038303952543F48637A494649d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 6016 sectors/track
* 16 tracks/cylinder
* 96256 sectors/cylinder
* 6537 cylinders
* 6535 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 288768 288767
1 3 01 288768 288768 577535
2 5 01 0 629032960 629032959
6 4 00 577536 628455424 629032959
root@srvsparcmml1:~# prtvtoc /dev/rdsk/c0t60A9800038303952543F48637A494653d0s2
* /dev/rdsk/c0t60A9800038303952543F48637A494653d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 64 sectors/track
* 256 tracks/cylinder
* 16384 sectors/cylinder
* 38404 cylinders
* 38402 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 262144 262143
1 3 01 262144 262144 524287
2 5 01 0 629178368 629178367
6 4 00 524288 628654080 629178367
root@srvsparcmml1:~#
The storage array is a NetApp FAS running Data Ontap 8.2.3 7-mode, FC SAN. From the storage perspective the ammount of blocks in the LUNs are the same 322163441664 so to the OS should appear the same, not a bit of difference.
Ideas, suggestions?